Product performance:
1. KKT flexible clamp rubber joints have good elasticity and long service life, especially for some harsh installation environments, which have relatively good adaptability.
2. Installed on the pipeline can realize the axial, lateral and angular displacement compensation of the pipeline to ensure the stable operation of the pipeline, thereby prolonging the service life of the pipeline.
3. It has a good vibration and noise reduction function, which greatly optimizes the operating environment of the pipeline.
Installation Notes:
1. During installation, it is strictly forbidden to use media that does not meet the requirements of this product. Please carefully read the additional installation instructions of the product before installation and use to avoid unnecessary losses.
2. The rated working pressure of the clamp-type rubber joint should be one gear higher than the actual working pressure to ensure the safe operation of the pipeline.
3. The pipeline must have a fixed support or a fixed bracket, and the force of the fixed bracket must be greater than the axial force. When installing vertically, overhead, or at the corners of the pipe, corresponding fixed brackets and force-bearing brackets must be installed at both ends of the product to prevent it from pulling off after working under pressure.
4. In the installation process, the clamp rubber joint must avoid exceeding its own displacement to compensate for the vibration and thermal expansion and contraction of the pipeline. By installing limit devices or increasing the number of rubber joints, it is the right choice to share the working pressure.
Product scope of use:
Because the clamp rubber joint has good comprehensive performance, it is widely used in basic projects such as chemical industry, construction, water supply, drainage, petroleum, light and heavy industry, refrigeration, sanitation, plumbing, fire protection, and electric power. It is especially suitable for large vibrations. Pipes with frequent changes in heat and cold.
